forming limit curves are used as a parameter in finite element analysis to control the material's level of formability. in this research, forming limit diagram (fld) of ss304l sheet was obtained by abaqusfinite element software. in practice, the experimental determination of a forming limit curve is a very time-consuming procedure which requires special and expensive equipment. forming limit di...

Stable ductile crack growth in 3 mm thick AISI 304 stainless steel specimens has been investigated experimentally and numerically. Multi-linear Isotropic Hardening method coupled with the Von-Mises yield criterion was adopted for modeling elasto-plastic behavior of the material. Mode-I CT fracture specimens have been tested to generate experimental load-displacement-crack growth data during sta...

The continuum mechanic simulation of micro-structural damage process is important in the study of ductile fracture mechanics. In this paper, the continuum damage mechanics model formulation proposed by Lematire has been validated against ductile damage evolution experimentally measured in A533B-C1 steel under stress triaxiality conditions. First, a &#10procedure to identify the model parameters...

The continuum mechanic simulation of micro-structural damage process is important in the study of ductile fracture mechanics. In this paper, the continuum damage mechanics model formulation proposed by Lematire has been validated against ductile damage evolution experimentally measured in A533B-C1 steel under stress triaxiality conditions. First, a procedure to identify the model parameters f...

this work is an attempt towards employing ductile damage criterion and finite elementsimulations for prediction of fracture initiation and evolution in deep drawing of copper/stainlesssteel clad sheets. the material mechanical properties and ductile damage parameters weredetermined through standard and notched tensile tests. the effect of some important processparameters on damage evolution wer...

modelling of crack propagation by finite element method under mixed mode conditions is of prime importance in fracture mechanics. this paper describes an application of finite element method to the analysis of mixed mode crack growth in linear elastic fracture mechanics. crack growth process is simulated by an incremental crack-extension analysis based on the maximum principal stress criterion,...

numerical methods such as boundary element and finite element methods are widely used for the stress analysis in solid mechanics. this study presents boundary element method based on the displacement discontinuity formulation to solve general problems of interaction between hydraulic fracturing and discontinuities. the crack tip element and a higher order boundary displacement collocation techn...

Numerical methods such as boundary element and finite element methods are widely used for the stress analysis in solid mechanics. This study presents boundary element method based on the displacement discontinuity formulation to solve general problems of interaction between hydraulic fracturing and discontinuities. The crack tip element and a higher order boundary displacement collocation techn...